|Table of Contents |Section Contents|

LOCATIONAL CLEARANCE FITS

           Size Ranges:
           ------------
Class      0 - 0.12      0.12 - 0.24   0.24 - 0.40   0.40 - 0.71    0.71 - 1.19
-----      ------------  ------------  ------------  ------------  --------------
LC1  Hole  +0.25  -0.0   +0.3   -0.0   +0.4   -0.0    +0.4   -0.0    +0.5   -0.0
LC1  Shaft +0.0   -0.2   +0.0   -0.2   +0.0   -0.25   +0.0   -0.3    +0.0   -0.4
LC2  Hole  +0.4   -0.0   +0.5   -0.0   +0.6   -0.0    +0.7   -0.0    +0.8   -0.0
LC2  Shaft +0.0   -0.25  +0.0   -0.3   +0.0   -0.4    +0.0   -0.5    +0.0   -0.6
LC3  Hole  +0.6   -0.0   +0.7   -0.0   +0.9   -0.0    +1.0   -0.0    +1.2   -0.0
LC3  Shaft +0.0   -0.4   +0.0   -0.5   +0.0   -0.6    +0.0   -0.7    +0.0   -0.8
LC4  Hole  +1.6   -0.0   +1.8   -0.0   +2.2   -0.0    +2.8   -0.0    +3.5   -0.0
LC4  Shaft +0.0   -1.0   +0.0   -1.2   +0.0   -1.4    +0.0   -1.6    +0.0   -2.0
LC5  Hole  +0.4   -0.0   +0.5   -0.0   +0.6   -0.0    +0.7   -0.0    +0.8   -0.0
LC5  Shaft -0.1   -0.35  -0.15  -0.45  -0.2   -0.6    -0.25  -0.65   -0.3   -0.8
LC6  Hole  +1.0   -0.0   +1.2   -0.0   +1.4   -0.0    +1.6   -0.0    +2.0   -0.0
LC6  Shaft -0.3   -0.9   -0.4   -1.1   -0.5   -1.4    -0.6   -1.6    -0.8   -2.0
LC7  Hole  +1.6   -0.0   +1.8   -0.0   +2.2   -0.0    +2.8   -0.0    +3.5   -0.0
LC7  Shaft -0.6   -1.6   -0.8   -2.0   -1.0   -2.4    -1.2   -2.8    -1.6   -3.6
LC8  Hole  +1.6   -0.0   +1.8   -0.0   +2.2   -0.0    +2.8   -0.0    +3.5   -0.0
LC8  Shaft -1.0   -2.0   -1.2   -2.4   -1.6   -3.0    -2.0   -3.6    -2.5   -4.5
LC9  Hole  +2.5   -0.0   +3.0   -0.0   +3.5   -0.0    +4.0   -0.0    +5.0   -0.0
LC9  Shaft -2.5   -4.1   -2.8   -4.6   -3.0   -5.2    -3.5   -6.3    -4.5   -8.0
LC10 Hole  +4.0   -0.0   +5.0   -0.0   +6.0   -0.0    +7.0   -0.0    +8.0   -0.0
LC10 Shaft -4.0   -8.0   -4.5   -9.5   -5.0  -11.0    -6.0  -13.0    -7.0  -15.0
LC11 Hole  +6.0   -0.0   +7.0   -0.0   +9.0   -0.0   +10.0   -0.0   +12.0   -0.0
LC11 Shaft -5.0  -11.0   -6.0  -13.0   -7.0  -16.0    -8.0  -18.0   -10.0  -22.0

Class       1.19 - 1.97  1.97 - 3.15  3.15 - 4.73
-----       -----------  -----------  ------------
LC1  Hole   +0.6  -0.0   +0.7   -0.0   +0.9   -0.0
LC1  Shaft  +0.0  -0.4   +0.0   -0.5   +0.0   -0.6
LC2  Hole   +1.0  -0.0   +1.2   -0.0   +1.4   -0.0
LC2  Shaft  +0.0  -0.7   +0.0   -0.9   +0.0   -1.0
LC3  Hole   +1.6  -0.0   +1.8   -0.0   +2.2   -0.0
LC3  Shaft  +0.0  -1.0   +0.0   -1.2   +0.0   -1.4
LC4  Hole   +4.0  -0.0   +4.5   -0.0   +5.0   -0.0
LC4  Shaft  +0.0  -2.5   +0.0   -3.0   +0.0   -3.5
LC5  Hole   +1.0  -0.0   +1.2   -0.0   +1.4   -0.0
LC5  Shaft  -0.4  -1.0   -0.4   -1.1   -0.5   -1.4
LC6  Hole   +2.5  -0.0   +3.0   -0.0   +3.5   -0.0
LC6  Shaft  -1.0  -2.6   -1.2   -3.0   -1.4   -3.6
LC7  Hole   +4.0  -0.0   +4.5   -0.0   +5.0   -0.0
LC7  Shaft  -2.0  -4.5   -2.5   -5.5   -3.0   -6.5
LC8  Hole   +4.0  -0.0   +4.5   -0.0   +5.0   -0.0
LC8  Shaft  -3.0  -5.5   -4.0   -7.0   -5.0   -8.5
LC9  Hole   +6.0  -0.0   +7.0   -0.0   +9.0   -0.0
LC9  Shaft  -5.0  -9.0   -6.0  -10.5   -7.0  -12.0
LC10 Hole  +10.0  -0.0  +12.0   -0.0  -14.0   -0.0
LC10 Shaft  -8.0 -18.0  -10.0  -22.0  -11.0  -25.0
LC11 Hole  +16.0  -0.0  +18.0   -0.0  -22.0   -0.0
LC11 Shaft -12.0 -28.0  -14.0  -32.0  -16.0  -38.0