|Table of Contents |Appendix Listing|

Appendix 25 Contents

• Appendix Tables
• Charts of Theoretical Stress-Concentration Factors
  • Table A-25.01 Bar in tension or simple compression with transverse hole
  • Table A-25.02 Rectangular bar with a transverse hole in bending
  • Table A-25.03 Notched rectangular bar in tension or simple compression
  • Table A-25.04 Notched rectangular bar in bending
  • Table A-25.05 Rectangular filleted bar in tension or simple compression
  • Table A-25.06 Rectangular filleted bar in bending
  • Table A-25.07 Round shaft with shoulder fillet in tension
  • Table A-25.08 Round shaft with shoulder fillet in torsion
  • Table A-25.09 Round shaft with shoulder fillet in bending
  • Table A-25.10 Round shaft in torsion with transverse hole
  • Table A-25.11 Round shaft in bending with a transverse hole
  • Table A-25.12 Plate loaded in tension by a pin through a hole
  • Table A-25.13 Grooved round bar in tension
  • Table A-25.14 Grooved round bar in bending
  • Table A-25.15 Grooved round bar in torsion

These charts, unless otherwise stated, are from R. E. Peterson, Design Factors for Stress Concentration, Machine Design, vol. 23, no. 2, p. 169, February 1951; no. 3, p. 161, March 1951,; no. 5, p. 159, May 1951; no. 6, p. 173, June 1951; reproduced with the permission of the author and publisher.